X-832 32 Zone Remote Paging Microphone
Controls
- Zone selector switch, 4 groups A.B.C.D & 32 zones
- Talk & Chime switch
- Level control volume
- Slide switch for Lock
Connectors
- RJ45 connector with X-808 main unit
Indicators
Power, Signal, Clip, Busy
1. INDICATOR
Power(Blue), Signal(Green), CLIP(Orange), Busy(Red)
2. MIC INPUT
Condenser MIC input jack
It is recommended to use a balanced MIC
3. GROUPING
User programble ZONE assignment
Press and hold GROUP key allow to assign zone group,you can select each zone when group
LED flashing
Press and hold again for store into memroy
4. ZONE SELECTION BUTTON
Turn on if pressing the switch to select the area to broadcast and turns off if pressing it again
5. PRE-ANNOUNCE CHIME BUTTON
Press and hold this button for locking the selected zone
Press this button for playing the pre-announcement chime
6. TALK
Press and hold the button to start broadcasting after selecting the broadcasting zone.
Releasing the button again to end broadcasting.
During broadcast, letter “R” is displayed on the main unit X-808
1. Termination
When multiple X-832 is connected to X-808, this switch needs to turned ON for RS485 termination
2. C-PORT JACK
Terminal to connect to X-808 main unit via UTP CAT5
Suggest not more than 300 meters distance to X-808
3. OUTPUT VOLUME
MIC and Chime broadcasting level can be adjusted by this potentiometer
Model | X-832 |
Rated Output Level / Impedance | 0dB / 600Ω Balanced |
Input sensitivity / Impedance | - 60dB~ / 20kΩ Balanced |
Frequency Response (-1dB) | 45Hz-15kHz |
T.H.D | <0.1% |
Signal to Noise Ratio | >90 dB |
Number of Zones | 32 zones |
Net Weight | 0.86kg |
Dimensions (WxHxD) | 140x60x205mm (base only) |